The most striking thing about the design of the VMax is that it looks and feels relatively sleek compared to many other advanced personal vaporizers.
|
vMax Mod
|
1. VMax is a smart microprocessor controlled electronic cigarette, that uses the latest technology to allow you to set a range of voltages. With its built-in three digital display there are no analog dials or protentio meters to wear out. There’s no way to accidentally reset the voltage and you can make changes within seconds.
2. Vmax allows you to digitally dial in your favorite voltages on its mini display. You can adjust the voltage from 3.0V to 6.0V using the built in user interface.
3. VMax with two 18350 high power excellent performance batteries.
4. VMax is made of cooper.
5. VMax PCB with 5 Amperage output limit.
6. VMax with flexble 360° Turnning around button
|
vmax battery
|
Variable Voltage Vmax specification:
Charging Time:3~5 Hours
Screw Thread:510 EGO Thread
Diameter:20mm
Battery Puffs:900-1700 Puffs
E-Cigarette Size:23*183mm
Package Size:185*122*55mm
E-Cigarette Weight:71.5g
|
vmax tube
|
Power adjust up:
1. Press the button 3 times in a row until “Uu” is shown on the display .
2. When Uu is shown on the display , leave the button ilde for 2 seconds. They display will change to show the last voltage selected.
3. Once the voltage is displayed, each time you press the button the voltage will advance to the next higher setting: 3.1,3.2,3.3 etc. When you reach 6.0, it will rotate back to 3.0 and go up again.
4. when you have reached the desired settin, leave the button idle for 2 second. The setting will be saved and VV will resum normal operation.
|
vmax thread |
Power adjust down:
1. Press the button 4 times in a row until “Ud” is shown on the display .
2. When Ud is shown on the display , leave the button ilde for 2 seconds. They display will change to show the last voltage selected.
4. Once the voltage is displayed, each time you press the button the voltage will advance to the next lower setting: 5.9,5.8,5.7 etc. When you reach 3.0, it will rotate back to 6.0 and go up again.
4. when you have reached the desired setting, leave the button idle for 2 second. The setting will be saved and VV will resume normal operation.
Power on/ off:
1. Press the button 5 times in a row until “So” is shown on the display .
2. When Ud is shown on the display , leave the button ilde for 2 seconds. They display will show the last setting , on or off .
4. Each time you press the button the display will toggle between on/off
4. when you have reached the desired setting, leave the button idle for 2 second. If you selected “OF” the VV will go into standby mode.
|
vmax electronic cigarette
|
Battery Check:
1. Press the button 6 times in a row until Uc is shown on the display.
2. When Uc is shown on the display, leave the button idle for 2 seconds, the digital display will show your battery voltage measurement.
3. The battery voltage will be displayed for 2 seconds, then the display will turn off.
Display information setting during vape:
1. Press the button 7 times in a row until dS is shown on the display,
2. When dS is shown on the display, leave the button for 2 seconds, the display will show the current setting: do ,du or dr .
3. Each time you press the button, the setting will toggle among “do” “du” or “dR” ,
4. When “do” is chosen, leave the button idle for 2 second, the setting will be saved and the display will show your atomizer working output voltage during your vaping;
5. When “du” is chosen, leave the button idle for 2 second, the setting will be saved and the display will show your battery voltage during your vaping.
6. When ” dR” is chosen,leave the button idle for 2 second, the setting will be saved and the display will show your atomizer resistance during your vaping.
|
vmax atomizer vv
|
LED ON /OFF:
1. Press the button 8 times in a row until “Lo” is shown on the display.
2. When Lo is shown on the display ,leave the button idle for 2 seconds , they display will show the current setting: ON/OFF .
3. Each time you press the button, the setting will toggle between on/off.
4. when you have reached the desired setting, leave the button idle for 2 seconds. The setting will be saved and VV will resume normal operation.
output short circuit protection during vape:
The display will show the below error code when there is short circuit:
1. F1: resistance for the heating coil of cartomizer is bigger than 0.5R, or smaller than 1.3R
2. F2: resistance for the heating coil of cartomizer is smaller then 0.5R
Suggested cartomizer ohm:
3V-4V for 1.5ohm,4V-5V for 2.0-2.5ohm,5V-6V for 3.0ohm.
|
vmax starter kit
|
|
vmax package |
|
Vmax mod starter kit
|
For more information of Vmax electronic cigarette mod or FREE QUOTE, Please email to: info@livingsmoke.com